-
- Coil Type
- Accuracy
- Steps per Revolution
- Step Angle
- Torque - Holding (oz-in / mNm)
- NEMA Frame Size
- Diameter - Shaft
- Length - Shaft and Bearing
- Mounting Hole Spacing
- Coil Resistance
- Series
| Partnumber | Description | Manufacturer
|
Type
|
Features
|
Size / Dimension
|
Voltage - Rated
|
Current Rating (Amps)
|
Operating Temperature
|
Termination Style
|
Coil Type
|
Accuracy
|
Steps per Revolution
|
Step Angle
|
Torque - Holding (oz-in / mNm)
|
NEMA Frame Size
|
Diameter - Shaft
|
Length - Shaft and Bearing
|
Mounting Hole Spacing
|
Coil Resistance
|
Series
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 80927016 | MOTOR 82920 GEARBOX RC65 - 48STE | Crouzet | 80927 | |||||||||||||||||
| WO-417-15-08 | STEPPER MOTOR | Lin Engineering | Round Shaft | Square - 1.650" L x 1.650" W (41.90mm x 41.90mm) | 24VDC | 2A | -20°C ~ 50°C | Wire Leads | Bipolar | 400 | 0.9° | 30 / 212 | 17 | 0.197" (5.00mm) | 0.787" (20.00mm) | 1.220" (31.00mm) | 0.7 Ohms | |||
| PM20L-180-025 | PERMANENT MAGNET STEPPER MOTOR | Lin Engineering | Round Shaft | Round - 0.787" Dia (20.00mm) | 12VDC | 0.25A | -20°C ~ 50°C | Wire Leads with Connector | Bipolar | 20 | 18° | 1.7 / 11.8 | 0.059" (1.50mm) | 0.394" (10.00mm) | 0.984" (25.00mm) | 21.5 Ohms | ||||
| PM25L-075-032 | PERMANENT MAGNET STEPPER MOTOR | Lin Engineering | Round Shaft | Round - 0.984" Dia (25.00mm) | 12VDC | 0.35A | -20°C ~ 50°C | Wire Leads with Connector | Bipolar | 48 | 7.5° | 3.7 / 26 | 0.079" (2.00mm) | 0.394" (10.00mm) | 1.260" (32.00mm) | 14 Ohms | PM | |||
| WO-4209S-01S | STEPPER MOTOR | Lin Engineering | Square - 1.669" x 1.669" (42.40mm x 42.40mm) | 24VDC | 670mA | -20°C ~ 50°C | Wire Leads | Bipolar | 400 | 0.9° | 31 / 219 | 17 | 0.197" (5.00mm) | 0.945" (24.00mm) | 1.220" (31.00mm) | 9.6 Ohms | ||||
| 14PY-Z064U | STEP MOTOR HYBRID UNIPOLAR 24V | NMB Technologies Corporation | Hybrid | Round Shaft | Square - 1.378" x 1.378" (35.00mm x 35.00mm) | 24VDC | 400mA | Connector | Unipolar | 400 | 0.9° | 5.67 / 40 | 14 | 0.197" (5.00mm) | 0.787" (20.00mm) | 1.023" (26.00mm) | 9 Ohms | 14PY | ||
| 14PM-F647ENVA3672 | STEP MOTOR HYBRID 24V BIPOLAR | NMB Technologies Corporation | Hybrid | Round Shaft | Square - 1.378" x 1.378" (35.00mm x 35.00mm) | 24VDC | 1.5A | Wire Leads with Connector | Bipolar | 200 | 1.8° | 18.41 / 130 | 14 | 0.197" (5.00mm) | 0.787" (20.00mm) | 1.142" (29.00mm) | 1.2 Ohms | 14PM | ||
| 17PM-Z249B | STEPPER MOTOR HYBRID BIPOLAR 24V | NMB Technologies Corporation | Hybrid | Round Shaft | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | 24VDC | 600mA | Connector | Bipolar | 200 | 1.8° | 22.66 / 160 | 17 | 0.197" (5.00mm) | 0.945" (24.00mm) | 1.220" (31.00mm) | 5.4 Ohms | 17PM | ||
| GT0200-23M201 | HYBRID 23 STEP MOTOR LOW BACKLAS | NMB Technologies Corporation | Hybrid Gear Motor | Flatted Shaft | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | 24VDC | 900mA | -10°C ~ 50°C | Wire Leads | Unipolar | 4000 | 0.09° | 495.75 / 3500 | 24 | 0.315" (8.00mm) | 1.260" (32.00mm) | 1.949" (49.50mm) | 5.8 Ohms | GT | |
| 17PM-K858-00VS | STEP MOTOR HYBRID UNIPOLAR 24V | NMB Technologies Corporation | Hybrid | Flatted Shaft | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | 24VDC | 750mA | -10°C ~ 50°C | Wire Leads | Unipolar | ±5% | 200 | 1.8° | 38.24 / 270 | 17 | 0.197" (5.00mm) | 0.984" (25.00mm) | 1.220" (31.00mm) | 7.4 Ohms | 17PM |
| 42M100B1B | STEPPER MOTOR PM BIPOLAR 5V | Portescap | Permanent Magnet | Round Shaft | Round - 1.650" Dia (42.00mm) | 5VDC | 400mA | -20°C ~ 70°C | Wire Leads | Bipolar | ±11% | 100 | 3.6° | 7 / 49.4 | 0.118" (3.00mm) | 0.450" (11.43mm) | 1.950" (49.48mm) | 12.5 Ohms | 42M | |
| SM2861-5122 | STEP, F2, SQ.86, 1.8, HALF INCH | Sanyo Denki SanMotion Products | Hybrid, Dual Shaft | Square - 3.386" x 3.386" (86.00mm x 86.00mm) | 100VAC | 4A | -10°C ~ 50°C | Wire Leads | Bipolar | 200 | 1.8° | 467.3 / 3300 | 34 | 0.500" (12.70mm) | 1.181" (30.00mm) | 2.740" (69.60mm) | 560 Ohms | |||
| PD60-4-1378-TMCL | PANDRIVE NEMA24, 48V, 3.1NM | Trinamic Motion Control GmbH | Hybrid | Integrated Controller, Flatted Shaft | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | 4.17VDC | 2.8A | -20°C ~ 50°C | Wire Leads with Connector | Bipolar | ±5% | 200 | 1.8° | 438.99 / 3100 | 24 | 1.5 Ohms | PANdrive™ | |||
| PD57-2-1076 | STEPPER MOTOR HYBRID BIPOLAR 24V | Trinamic Motion Control GmbH | Hybrid | Integrated Controller, Flatted Shaft | Square - 2.362" x 2.362" (60.00mm x 60.00mm) | 2.3VDC | 2.8A | -20°C ~ 50°C | Wire Leads with Connector | Bipolar | ±5% | 200 | 1.8° | 143.03 / 1010 | 23 | 0.8 Ohms | PANdrive™ | |||
| PD42-2-1140-TMCL | STEPPER MOTOR HYBRID BIPOLAR 24V | Trinamic Motion Control GmbH | Hybrid | Integrated Controller, Flatted Shaft | Square - 1.654" x 1.654" (42.00mm x 42.00mm) | 24VDC | 2A | Wire Leads with Connector | Bipolar | ±5% | 200 | 1.8° | 51 / 360 | 17 | 0.197" (5.00mm) | 0.945" (24.00mm) | PANdrive™ |
- 10
- 15
- 50
- 100